Tap Faucet Services

Why Choose Us?
- PLUMBING EXPERTS: Our plumbers have over 35 years of experience in the industry, serving 1000s of residential & commercial estates.
- FULL 1-STOP PLUMBING SERVICES: Our top-to-bottom plumbing service is designed to be fuss-free for you. Besides having your plumbing fixtures repaired or replace, you can even buy & Install water heaters, toilet bowls, taps & more from us at direct contractor prices!
- RANGE OF PLUMBING SERVICES: Our plumbers carry out a comprehensive list of plumbing works including clearing chokes, fixing leaks, water heater services, tap installation services & more. Each service is done with thorough care.
Our Full Range Of Tap & Faucet Services Include:
Tap Installation
If you are looking to install a new tap in your bathrooms, kitchens, or showers we have a variety of tap brands and models, suitable for residential and commercial buildings. We are also happy to just perform the tap installation service for you!Tap Replacement
If your tap displays signs that they are due for a replacement, do consider doing it to prevent further plumbing issues and costs. You can choose from a variety of our tap brands and models to install, or we would simply perform the tap installation service for you.Tap Repair
if you are in need to solve these tap issues below, call us for a tap and faucet repair:- Low Water Pressure
- Leaking Tap
Our Trusted Clients

We've Served More Than 75,000 Customers
In Singapore With 8000s Of Strong Reviews
How Can We Help You Today?
Table of Contents (click on the sub-topic to get to the section you want)
Everything You Need To Know About Taps
There is a wide range of water taps, and we are about to share everything you need to know about taps to identify which kind is a good fit for your home.
Mixer Taps
This type of faucet can have a single-lever (or handle) or double-lever. The single-lever lets you change from hot to cold water with just one handle shifting sideways. Meanwhile, the double-lever has one handle to turn cold water, and if you switch on the other side, it will be warm.
Bath and Shower Taps
These types of faucets are generally intended as mixer taps. Hence, it allows you to have hot and cold water from the same faucet. These faucets can also be a two-way faucet or a shower mixer faucet.
Kitchen Sink Taps
These installed taps are usually intended to have a tall neck spout that is able to turn to assist you when cleaning.
Basin Mixers
The faucets are designed if you are going to install a wash basin only. Households that are old could only use a cold water faucet for their wash basin.
Bidet Tap
Bidet sprays are installed pull-out spray extensions that are beside your toilet bowl. It is proclaimed to be cooperative equipment to develop your hygiene after you use the bathroom.
Washing Machine Tap / Service Tap
Their main task is to switch on and distribute water. This may also be installed as shower taps since it is attached to the water heater.
Being knowledgeable about your taps, as well as the common types of faucets, can help you identify the correct faucet type you will need for your household.
Common Types of Faucets
There are many ways for you to avoid an expensive water bill, and among them is choosing the right type of faucet to install for your house. Knowing which common faucet type is right for you is always essential to avoid constant servicing.
Ball Faucet
This faucet is washerless and includes a handle linked directly to a round cap on top of the spout. This handle controls a ball within the faucet, adjusting the water flow’s volume and temperature control.
Due to its many components, this faucet is more susceptible to leaking than other faucet products such as a cartridge faucet and disc faucet.
Disc Faucet
This faucet type’s most notable feature is its wide cylinder-shaped body which comes with a single lever that can be lifted in any direction. This is so that you can control the water flow’s temperature level and volume.
Cartridge Faucet
This faucet consists of a more luxurious design and is mostly used in affluent venues such as hotels. Unlike compression faucets which require some turning to shut off the gate valve, this faucet type allows you to close the valve in one turn.
Compression Faucet
Compression faucets are normally regarded as an older type of water tap and are mostly used in older commercial restrooms. They also consist of two handles which control hot and cold water.
Touch-less Faucet
This commercial bathroom faucet is fairly easy to use since it uses a motion sensor. Hence, only a mere wave of the hand is required to turn it on.
Deck Plate Faucet
A deck plate faucet normally consists of a handle, dispenser, and spout set atop a plate. This plate isn’t actually necessary for you to have since the three parts can be assembled by themselves.
Wall Mounted Faucets
It is normally linked to a plumbing pipeline in the wall and requires professional installation. Moreover, wall-mounted faucets have been gaining in popularity due to their modern aesthetic and their ability to conserve space.
Installed faucets in the kitchen or in the bathroom can still be faulty, especially if they are not well maintained. Calling professional plumbing services can help you identify the most common faucet problems as well as fix them for you.
The Most Common Faucet Problems
We have listed a few of the most common faucet problems that our plumbers regularly encounter. Regular cleaning and maintenance of your installed taps and faucets is key to avoiding such issues.
Absence Of Running Water
Although more modern faucets are better at preventing residue and avoiding blockages, sediments can still build up inside them over time. To solve this, examine the shut-off valve to see if it’s open.
Leaky Faucet
One of the most disturbing things anyone can experience is having a leaking tap. You can usually detect a water leakage from your faucet from under the handle, at the base of the spout, from the aerator, and the spray head.
Unusual Faucet Noises
Faucet noises can consist of anything from whistling to chattering, which should alarm you to a plumbing issue that needs immediate attention. A loose washer may be causing this, but if fixing it fails to solve the problem.
Decreased Water Pressure
It’s most likely that low pressure in your faucet occurred after the faucet installation process or after your tap was replaced.
In situations where the water pressure suddenly dropped in an existing faucet, the cause may be traced to limescale buildup within your faucet or problems with your overall water supply.
Poor Faucet Installation
Many times it is because of DIY mistakes, or the tap was not correctly installed by the supplier. As a result, some might face a leaking tap or low water pressure soon after installation.
Rust Formation
Rust forming on the surface of your faucet is not a good sign. Age and wear and tear mostly cause this and the best way to solve it is to replace your tap with a more rust-resistant pipe and faucet.
Bidet Spray Malfunction
Bidet sprays have been known to leak, whether from the spray head or the flexible hose. Limescale can also build up on its parts due to the calcium deposits in the water supply. If this happens to be the case, soak your tap in vinegar to cleanse it.
Replacing your faulty faucet is ideal if a simple repair is not enough. Our plumbing experts can help you with your decision on how to choose a faucet for your bathroom or kitchen.
How To Choose A Faucet For Your Bathroom Or Kitchen
Living without an installed faucet or installed shower is essentially inconceivable. In fact, it is one of the most critical aspects of any functioning household since it performs many important functions. It is ideal if you know how to choose a faucet for your bathroom or kitchen.
Take Faucet Design Into Consideration
Taps with long spouts and watering can design more suitable for bathroom use. On the other hand, a tap with a pull-out spout is more appropriate for modern kitchen sinks due to its contemporary design.
Know Where Your Tap Should Be Mounted
Whether it be an installed shower or bidet, each type of faucet serves its own function. They also include a long spout in order to reach the sink’s central portion and to perform various functions such as filling large containers and washing dishes.
Keep Faucet Structure In Mind
When it comes to faucet structure, installed taps with hi-tech and minimalistic designs are currently the trend. Among them are models consisting of cylindrical lines and smooth shapes.
Brand new installed faucets can bring a lot of comfort to your household. There are a lot of ways to maintain your faucet and retain its shine to avoid them from getting tarnished.
Ways To Maintain Your Faucet and Retain Its Shine
There are several ways to maintain your faucet and retain its shine. Chrome components and the contemporary style of water taps and faucets bring soap residue, watermarks, and dirt quickly.
Regular Cleaning
When water taps are left dirty for a couple of days, you will notice that you cannot clean them properly by just using ordinary soap. Hence, clean your bathroom including your water taps and bathroom accessories at least once or twice a week to prevent the build-up of water marks and dirt.
Thorough Cleaning Of The Faucets
If you like to do basic cleaning to your installed taps, start off by brushing all the edges using a sponge. Remember that there are several finishes that do not allow brushes. A cleaning cloth plus warm water can get rid of some dirt on the edges of the faucet.
Remove All Stains
In order to get rid of the blemishes on your bathroom or kitchen mixer taps, put a bit of baking soda and scrub the edges with a toothbrush, then add droplets of water.
Use White Vinegar To Get Rid Of Dirt
White vinegar is the expert in removing dirt. To get rid of the dirt, put half a cup of white vinegar and add the same amount of hot water. Then dip the cleaning cloth in the cleaning solution and scrub all the edges of the installed taps.
Conclusion
A faucet is not just a device wherein water comes through. It is the whole mechanism for controlling the flow of water. There are a variety of faucets that are suitable for your kitchen, bathroom, or laundry area. Water taps also encounter difficulties such as water leaks, unusual noises, rust formation, and more. That is why you must know how to maintain your faucets to prevent serious issues like flooding. If you need help with your taps, you may contact us at Everyworks Singapore. We have a team of reliable plumbers who can carry out a faucet installation or repair for you. You may also check our website to see a wide range of tap & faucets to help you choose for your household.
Everyworks Singapore gives you the quickest solution to resolve all home maintenance issues faced by the busy modern individual. Fast response, fast arrangements and quality workmanship at reasonable and affordable prices. As a leading trusted service provider in Singapore, we have served over 20,000 customers delivering outstanding service with hundreds of highly-rated reviews on both Google and Facebook for our professional plumber, electrician, aircon servicing technicians and handyman teams. Read through our articles and browse our past works to find out more about our home services in Singapore. To find a quick solution to your home repair woes, contact our dedicated and fast response customer support with a picture or a quick text by Whatsapp at +65 82410032.
Case Study
Replace Kitchen Sink Tap Plumber Singapore (HDB – Yishun)
Kitchen Tap Replacement Plumber Singapore (Condo – Sengkang)
Shower Mixer Tap Replacement Plumber Singapore (HDB – Jurong West)
Basin Tap Replacement Plumber Singapore (Condo – Jurong West)
Last Updated on September 19, 2024






















