adjust-bidet-spray-head-why-bidet-spray-low-water-pressure-bidet-spray-installation-services-everyworks-plumber-singapore

5 Reasons Your Bidet Spray Has Low Water Pressure

Looking for Bidet Spray Services? Whatsapp Us for Help! Whatsapp to Start Now!

As is the case with most plumbing installations, a bidet spray installation can result in low water pressure if not done properly. Oftentimes, this occurs because of a number of factors such as incorrect spray adjustment, plumbing leaks, and issues with the main water system. If you are currently experiencing low bidet spray pressure, you need not worry as there are a number of solutions you can try to resolve this problem. 

 

Check If Any Leaks Are Present

check-if-leaks-present-why-bidet-spray-low-water-pressure-bidet-spray-installation-services-everyworks-plumber-singapore

Among the leading causes of low bidet spray pressure are certain types of plumbing leaks such as water pipe leaks. One way to identify and resolve a plumbing leak is by covering the area that you think is leaking with a tiny piece of toilet paper. If it becomes wet, then you can confirm that a leak is present. Call a plumbing leak service should you suspect that loose fittings are causing the leak.

 

Inspect The Water Supply Going To The Spray

inspect-water-supply-why-bidet-spray-low-water-pressure-bidet-spray-installation-services-everyworks-plumber-singapore

Just as you would when experiencing common faucet problems, one thing you can do if you’re experiencing low bidet spray pressure is to ensure that there is adequate supply going to the spray. 

A bidet spray can experience low water pressure if the main water supply has been lowered by accident. You can also try to check the at-valve containing a pressure regulator and turn it on if needed. In case you experience difficulty doing either of these, it is best you find a reliable plumber

Among the misconceptions which people have regarding plumbing is that low water pressure is not indicative of any common plumbing problems. Take note that clogging can be one reason why there is not enough water flowing into the spray. The amount of water released by your bidet spray is in fact equal to the level of water inflow in your system. As such, any decrease in the pressure from your spray signifies a problem in overall water pressure.

 

Adjust Your Bidet Spray’s Head

adjust-bidet-spray-head-why-bidet-spray-low-water-pressure-bidet-spray-installation-services-everyworks-plumber-singapore

If you want to extend your plumbing system’s lifespan, it is essential that you always inspect your bidet spray head to determine if it requires adjusting. However, this may only be applicable for certain models which have softer and wider spray options. Remember that some bidet sprays in the market only have one type of spray setting.

Nevertheless, if your bidet spray can be adjusted, be sure to narrow its width so that you can ensure that the pressure being released is strong enough. 

 

Inspect Your Home’s Water Pressure

If you find that your bidet spray suddenly releases inadequate pressure, you may want to check if your main water supply is experiencing issues. You can use a pressure gauge to confirm the pressure levels. Normal water pressure tends to range from 40-60 PSI with the standard being 30-80 PSI. It is best to contact a professional plumber right away if the pressure measures above 80 PSI.

 

See If You Have Water Failure In Your Area

Water failure can also be a reason why you are facing low water pressure from your bidet spray. Oftentimes, this is due to water service interruption in the homeowner’s area. Though not common, it can still be a viable factor. Besides service interruption, other causes for water failure include plumbing issues for which to call an emergency plumber. Among them are defective pressure regulators, blocked pipes, and corroded plumbing. 

 

Conclusion

If you installed a bidet spray and are facing low water pressure, there are many factors to consider. Among them are leaks as well as water failure in your area. It is also possible that your home’s water pressure has a problem or you may need to inspect the supply of water to the spray. Otherwise, simply adjust your bidet spray head. In case you are still unable to determine the cause of your bidet spray’s lack of water pressure, call Everyworks Singapore. Our experienced plumbers can help identify the cause of this issue and get it resolved efficiently. 

 

Everyworks Singapore provides the best home maintenance solutions available in Singapore. Moreover, we ensure quick customer response, prompt booking, and reasonable and affordable prices for whatever services you acquire. Our highly experienced and skilled plumberelectricianaircon servicing technicians, and handyman teams can also guarantee that the work performed is completed professionally and efficiently as illustrated by our highly-rated Google and Facebook reviews. See our past home maintenance works and articles to learn more about our home services in Singapore. To set an appointment promptly and have your issues resolved immediately, simply contact our attentive customer support team by sending a quick text or picture through Whatsapp at +65 8241 0032

 

This article was reproduced from Mr Plumber Singapore.

Related Posts